Amiga 500 HDMI connector holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a Delock 85463 HDMI panel-mount cable as Amiga 500 HDMI connector
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 923
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: This model does not fit to the GOEX drive r.2023 or later.
After adding a RGBtoHDMI converter to my Amiga 500, I had the problem that I had to get the HDMI signal out of the case. There is also a GOEX SD disk drive simulator in my Amiga, which leaves the case opening of the former disk eject button open. I was surprised that the size of the opening perfectly matches the size of a HDMI connector.
This mounting frame holds a Delock 85463 HDMI panel-mount cable in place at the correct position below the GOEX drive. There is no need to cut or drill holes into your Amiga 500 case for a HDMI connection any more.
Please note that I cannot provide frames for other Amiga or cable models. Also note that the frame won't fit on Gotek drives, nor on GOEX drives with an USB connector.
There is an alternate version of this mounting frame for FPC ribbon cable connectors.
Printing
Do not use supports! The part is designed to be printed without supports, and it will be difficult to remove them later.