5:1 Ogive nosecone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5:1 ratio ogive nosecone designed to fit a tube with an OD:41.6mm and ID:40.5mm.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
5:1 ratio ogive nosecone designed to fit a tube with an OD:41.6mm and ID:40.5mm.
The nosecone has been split into 3 separate parts so that it can be printed on a small print bed. The nosecone is two parts with a maximum hight of 120mm with the shoulder printed separately.
The shoulder has been separated from the main nosecone so that a plywood bulkhead can be installed from the inside before it is glued to the rest of the nosecone.
All the parts have been drawn with a wall thickness of 1.5mm.
I have included files for all the parts separately, as well a file that has all 3 parts laid out ready to print.
Print instructions
Category: 3D Printing Print Settings
Printer Brand: Up!
Printer: Up Plus
Rafts: Yes
Resolution: 0.25mm
Infill: 100
Notes:
Printed in ABS