DESTINY 2 BAD JUJU BEAST MAGIC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BAD JUJU - SCALE TO 80% BEFORE PRINTING
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a big one, designed to be printed on a large bed printer 300x300. Most parts will fit on a smaller printer but the handle won't. There are cut outs for LED lighting to the eye sockets and the barrel and a microswitch in the trigger. There is room in the handle for an 18650 rechargeable battery and holder as well as TP4056 battery charger modules. Magnets holes for the magazine. A 5mm diameter spring can be fitted to the bolt mechanism a couple of compression springs for the trigger. I would suggest using some 6mm rod or bolt for the pull lever on the bolt for added strength. And finally some leather or PVC Leather for the straps.