DESTINY 2 BAD JUJU BEAST MAGIC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BAD JUJU - SCALE TO 80% BEFORE PRINTING
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 222
- Makes
- 0
- Views
- 1,299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a big one, designed to be printed on a large bed printer 300x300. Most parts will fit on a smaller printer but the handle won't. There are cut outs for LED lighting to the eye sockets and the barrel and a microswitch in the trigger. There is room in the handle for an 18650 rechargeable battery and holder as well as TP4056 battery charger modules. Magnets holes for the magazine. A 5mm diameter spring can be fitted to the bolt mechanism a couple of compression springs for the trigger. I would suggest using some 6mm rod or bolt for the pull lever on the bolt for added strength. And finally some leather or PVC Leather for the straps.