1 / 6
Stealthburner LGX lite Mount with SB2209 (RB2040), Filament Sensor + Filametrix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for the SB2209 with RB2040 (bigger connectors) on a SB with LGX Lite + Filametrix + Filament Sensor
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 263
- Wydruki
- 0
- Wyświetlenia
- 1834
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (2)Kolekcje (60)Powiązane
I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board.
Thank you to the work of https://www.printables.com/@DanielHasting_664593 and https://www.printables.com/@garethky_1988, I only did small changes.
In order to get a full Toolhead you need…
- from the Filametrix Repo
(https://github.com/sorted01/Filametrix/tree/main)- Printhead Front + Back (i used a Dragon HF)
- Cutting Arm
- Knife Holder
- From @gareth.ky's Stealthburner / LGX Lite / EBB2209 Remix (https://www.printables.com/model/437832-stealthburner-lgx-lite-ebb-2209-2240-remix)
- Main Cover
- Fan/Lights PCB Holder (to be mounted behind the parts cooling fan)
- SB2209 PCB Holder (to be mounted on the side of the LGX Lite)
- Lever extender
- From my files
- Extended Cable Bridge to hold BTT's CAN Cable
- The two parts enclosing the LGX Lite (More Filametrix Lever room / changed heatset)
- The Cover with increased clearance to make room for the bigger connectors of the RB2040
Assembly:
- Follow the FIlametrix Instructions in their Git Repo, for the Filament Sensor have a look in @DanielHasting_664593 original, you need a 6x3 magnet for the filament sensor with a standard microswitch