1 / 7
IKEA Tertial Bottom Steel Tube Strengthening Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this since my the bottom part of my IKEA tertial lamp was bent… Designed with a slidefit (on mine).
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 88
- Wydruki
- 4
- Wyświetlenia
- 326
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (25)Powiązane
I made this since my the bottom part of my IKEA tertial lamp was bent…
I designed this in Fusion 360, made to slide into the bottom of the steel tube part of the lamp.
Its drawn with a diameter of ø9.65 mm to slide in the pipe that was ø9.69mm .
I printed it with some extra perimeters for some extra strength (see screencap.) and laying down for best layer adhesion relative to the forces it is exposed to.