25mm Table Clamp with 1/4" thread brass insert hole and separate padding for the screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pretty sturdy table clamp with 1/4 thread heat set insert hole. Includes .step files for remixing.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 772
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Table clamp for 25mm tabletops. It's strong enough with the ¼ inch heat set insert to hold a SmallRig arm and a heavy phone at the other end.
Included step files can also be easily customized for different thicknesses. The screw model file also contains a separate part for a TPU padding to protect the table. You can print the TPU padding as a multimaterial print directly into the screw or separately.
For the clamp itself, use a low-creep material such as PETG or PC. I don't recommend PLA. When tightening the clamp, PETG will visibly flex but not break. Prioritize perimeters over infill. Works with 4 perimeters, but 6 or more will be even stronger.
I used a 10mm deep ¼ inch brass heat set insert.