25mm Table Clamp with 1/4" thread brass insert hole and separate padding for the screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pretty sturdy table clamp with 1/4 thread heat set insert hole. Includes .step files for remixing.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 150
- Makes
- 0
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Table clamp for 25mm tabletops. It's strong enough with the ¼ inch heat set insert to hold a SmallRig arm and a heavy phone at the other end.
Included step files can also be easily customized for different thicknesses. The screw model file also contains a separate part for a TPU padding to protect the table. You can print the TPU padding as a multimaterial print directly into the screw or separately.
For the clamp itself, use a low-creep material such as PETG or PC. I don't recommend PLA. When tightening the clamp, PETG will visibly flex but not break. Prioritize perimeters over infill. Works with 4 perimeters, but 6 or more will be even stronger.
I used a 10mm deep ¼ inch brass heat set insert.