1 / 3
Raspi camara mount for the 2020 end of profile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mount will fit on the end of the 2020 v-slot tube. The end plate is for the printing support, cut away. You might…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The mount will fit on the end of the 2020 v-slot tube. The end plate is for the printing support, cut away. You might need also to shorten two opposite joints if there is a corner bolt through the tube.
The 4mm bolt can be used to secure the part in place but probably not needed.
These can be printer vertical with out the support
Category: 3D Printer Accessories