ElecHouse PN532 V3 NFC holder for Voron for Spoolman integration.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A NFC reader holder for Voron 2.4/Trident, used to integrate tags on spools with Spoolman and Klipper.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 2836
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Automatic Klipper/Spoolman configuration with RFID-tags
This model is part of a system I use to select Spoolman spools from RFID tags attached to spools in klipper. Klipper can then verify that the right filament is used before printing and it can update moonraker so it reports the right spool to Spoolman.
The software
There are three programs:
- nfc2klipper - reads the tag, sends info to Klipper about it. Automats spool changes with spoolman.
- spoolman2slicer - reads spool/filemant info from Spoolman and creates filament config files for slicers.
- spool2klipper - sets info in Klipper variables about the current selected spoolman spool.
The model
This is the model that houses the NFC reader. It has been made to be printable without support, but unfortunately both parts are upside down here. Just turn them 180 degrees in the slicer before printing.
I printed it in PLA with 18% infill, 3 perimeters, 3 top & 3 bottom layers. It can be hard to slide the bottom into the top if you get an elephant foot so please calibrate that before.
The Onshape model is available here.
At first I thought I should have the tags attached to filament samples and put them into a slot in front of the reader when changing spools. That way it is easy to reuse the tag for the next spool of the same filament, but then I changed my mind and made this instead. The original model & tag holder are still part of the onshape model. It probably works, but I've never printed the whole model.
BOM
- Elechouse PN532 V3 NFC reader with connectors & cables.
- M3x18 SHCS
- M3 T-nut HNTAJ5-3
- RFID tags. I bought these. Maybe Prusa's new OpenPrintTags will work. I'll test them shortly.