Snapmaker Rotary Module 2" Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2" Extension for the Snapmaker rotary module to engrave things with handles.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 705
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Careful setup required prior to start
Set work origin on the machine manually. Prior to start it will ask you to input the dimensions again - SET FAKE PARAMETERS GREATER THAN YOUR ACTUAL WORK TO PREVENT IT FROM RAMMING YOUR MATERIALS UPON “CALIBRATION”. Recommend 200mm+ diameter, then simply move back to your already set work origin.
2" Extension for the Snapmaker rotary module to be able to better engrave things with handles.
Included Files:
-STL: Chuck, tail stock
-3mf: (Chuck and Tail)To be edited with your 3d modeling program of choice
-f3d: (Chuck and Tail) To be edited with fusion 360
To be used with 60mm M4 screws: https://www.amazon.com/XunLiu-Socket-Screws-Wrench-Knurled/dp/B07CHKJKRX/ref=sr_1_4?keywords=M4x60%2Bscrew&qid=1639817881&sr=8-4&th=1
Category: 3D Printer Accessories