1 / 5
Bird bath seat / Vogeltränken Landeplatz — zdjęcie 1
1 / 5

Bird bath seat / Vogeltränken Landeplatz

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement seat for our bird bath / bird feeder.

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
380
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

For one of our birdbaths (which is dual purpose and can be converted into a birdfeeder) the "seat" or "landingplace" for the birds broke into pieces after some years of being exposed to the weather. The original was made of some wood with a thread so it could be screwed/unscrewed and converted into a bird feeder. 

I could have tried replacing it with a wooden make but decided to use the chance to finally learn OnShape CAD and print it.

I made it from PLA Filament - well aware that it might not last for another decade - let's see. 

Dimensions:

Diameter: 80mm

Height: 15mm

Might be able to scale.

I left a 8mm wide, 12mm high hole so I could fit in a threadinsert.

Works well for me.

You might want to check which Filament to use and depending on how durable you want, you need to change the slicing settings. I used 0.2mm layer height and 5 top/bottom layers as well as 5 walls.

Maybe this is useful for somebody.

 

 

Tagi