Bird bath seat / Vogeltränken Landeplatz
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement seat for our bird bath / bird feeder.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
For one of our birdbaths (which is dual purpose and can be converted into a birdfeeder) the "seat" or "landingplace" for the birds broke into pieces after some years of being exposed to the weather. The original was made of some wood with a thread so it could be screwed/unscrewed and converted into a bird feeder.
I could have tried replacing it with a wooden make but decided to use the chance to finally learn OnShape CAD and print it.
I made it from PLA Filament - well aware that it might not last for another decade - let's see.
Dimensions:
Diameter: 80mm
Height: 15mm
Might be able to scale.
I left a 8mm wide, 12mm high hole so I could fit in a threadinsert.
Works well for me.
You might want to check which Filament to use and depending on how durable you want, you need to change the slicing settings. I used 0.2mm layer height and 5 top/bottom layers as well as 5 walls.
Maybe this is useful for somebody.