Snap Fit Plant Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modern, simple planter stands in various sizes. Snaps in place stable without glue or screws
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 194
- Wydruki
- 2
- Wyświetlenia
- 1236
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I didnt find good planter stands that would be stable without glue, screws or would be simple to print. So i made these ones. They are easy to print, simply snap into place so you can put all the 3d printed planters on a good looking stand.
If you want to print multiple colors like in my fotos, just change your filament at layer 13 and back on layer 19 ( assuming 0,2 mm layer height) or just do it however you like.
The files are titled by witdh x height.
If you like it, leave a make!
In my case the stands were very sturdy but please test it first before you put a heavy plant on it ;)