PWM Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing for some PWMs I got from ali express (e.g.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 514
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A housing for some PWMs I got from ali express (e.g.: https://www.aliexpress.com/item/Free-Shipping-DC-New-1-8V-3V-5V-6V-12V-2A-Low-Voltage-Motor-Speed/32610905123.html?spm=a2g0s.13010208.99999999.283.x3ftfS) .
The bottom has small clips that mate with small slots in the top piece.
M2x4mm screws can be used to attach the board to the lower piece (probably up to 6-7mm length would work). 3mm holes are in the upper housing to attach the entire assemble to something else.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer: Tevo Tarantula
Rafts: No
Supports: Yes
Resolution: .2mm
Notes:
Top needs supports turned on, bottom should be fine without.