Cable/Wire Clamp with Chamfered edges, 10mm Diameter x 5mm screw (Resizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Cable/Wire clamp, made for cables of 10mm diameter, mounted with screws of 5mm diameter. Resizable.
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 446
- Wydruki
- 4
- Wyświetlenia
- 1202
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a simple cable clamp for mounting cables to surfaces. The screw hole has a diameter of 5mm, and the cable hole has a diameter of 10mm. This design is resizable, so only one file has been supplied (Though, I can create more sizes if requested).
I added a Chamfer to the inner and outer edges to make for a clean design, and possibly help with keeping the clamp straight during installation. I avoided a chamfer in the screw hole, as this might be used as leverage by the screw to split the layers.
Print sideways for best results, supports should not be required.