Sovol SV06 KUSBA X-Axis mount (temporary)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick-and-dirty X-axis mount for a KUSBA for klipperizing the Sovol SV06.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mount to measure the X-axis resonance of a Sovol SV-06 with a KUSBA V2 accelerometer.
You will need longer M3 screws than the factory screws to mount this. I used 10mm countersink screws.
This mount does not clear the Z-axis carriage, so you will want to remove it before doing any printing or it will crash when the print head moves too far right.
The cable also connects below the mount. This means that you will need to do something to keep the cable OFF the bed during testing to avoid creating any weird damping that invalidates your testing.
The fitment is snug. Press the KUSBA into the mount while the print is still warm on the bed.