MWP-606 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I AM NOT AN ELECTRONICS EXPERT. USE AT YOUR OWN RISK This is a cover I made for my Mean Well MWP-606 power supply. I…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I AM NOT AN ELECTRONICS EXPERT. USE AT YOUR OWN RISK
This is a cover I made for my Mean Well MWP-606 power supply. I was inspired by other BETTER covers. I chose to do this so that I could use one of the common to find on Amazon IEC sockets.
I have a supergun that operate on my desk a lot and I didn't want to accidentally reach over and fry my arm by accident. So I went looking for a cover for my PSU. I found a few that were awesome(https://www.thingiverse.com/thing:4462296) but didn't quite meet my needs for one reason or another.
There is a hole for the power cabling that goes with my Minigun supergun. There is also a hole to allow for access to the voltage adjust knob.
I AM NOT AN ELECTRONICS EXPERT. USE AT YOUR OWN RISK
Category: Video Games