Retraction Triangle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibrate machine / slicer speed, cooling, retraction, bridge, overhang, etc.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was recently having stringing issues after switching to a .6 nozzle. After looking around, I decided to make my own that offers a little more testing diversity vs others I've seen. Each leg is a different shape ( cylinder , cone, cube ). The overall shape is triangular. The way I use this is I put one on the build plate at 125% then another on top at 100% scale then another on top of that at 75% scale. You can also print each with different settings to dial your machine in even better once you get things close enough.