Stealth Press (Adapted to 2020 Extrusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealth Press files adapted to use a 2020 aluminum extrusion.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I had a lot of spare parts after converting my Ender 3 to a Switchwire, including a linear rail that was 20mm too long for the orignal Stealth Press. So I decided to just adapt the existing files to my spare 2020 aluminum extrusion that served as the original x axis on the ender 3.
The legs attach using 2 m5x10 screws and t-nuts on each side. Same for the top piece, but I only used one in the lower position and one in the higher on the alt side. So, need at least 6 m5x10 screws and m5 T-nuts for the printed parts + whatever screws and nuts needed to attach your linear rail.
The rest of the pieces I used the original files, and attached to the extrusion using m3 screws and t-nuts. Including the not a keybak mount.
Additionally, I had F623rs from the ender 3 belted z mod, So I adapted the pulley spacer model to fit these and adapted the Stealth Press top piece to use m3 screws to fit. I have included a top piece retaining the orignal holes for m5 screws.
(also I used this model for the soldering iron mount since I had an mgn9, Thanks @JWhite!)
Thanks to @IconicFAB and @suyash_601871