Stealth Press (Adapted to 2020 Extrusion)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stealth Press files adapted to use a 2020 aluminum extrusion.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 138
- Makes
- 0
- Views
- 1,016
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I had a lot of spare parts after converting my Ender 3 to a Switchwire, including a linear rail that was 20mm too long for the orignal Stealth Press. So I decided to just adapt the existing files to my spare 2020 aluminum extrusion that served as the original x axis on the ender 3.
The legs attach using 2 m5x10 screws and t-nuts on each side. Same for the top piece, but I only used one in the lower position and one in the higher on the alt side. So, need at least 6 m5x10 screws and m5 T-nuts for the printed parts + whatever screws and nuts needed to attach your linear rail.
The rest of the pieces I used the original files, and attached to the extrusion using m3 screws and t-nuts. Including the not a keybak mount.
Additionally, I had F623rs from the ender 3 belted z mod, So I adapted the pulley spacer model to fit these and adapted the Stealth Press top piece to use m3 screws to fit. I have included a top piece retaining the orignal holes for m5 screws.
(also I used this model for the soldering iron mount since I had an mgn9, Thanks @JWhite!)
Thanks to @IconicFAB and @suyash_601871