1 / 2
Another Needle File Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wasn't happy with any of the needle file handles I could find so I made one.
- Ocena
- 4,5 / 5
- Polubienia
- 313
- Pobrania
- 789
- Wydruki
- 8
- Wyświetlenia
- 2991
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 8) (Komentarze: 12)Remiksy (0)Kolekcje (423)Powiązane
Couldn't find a needle file handle I was happy with, so I made another. The needle files from my local hardware store are 3mm (1/8") in diameter and so the handle is sized accordingly. If your files are a different size, let me know the diameter and I can export another stl file.
Features:
- Handle is designed to print horizontally, so the fingers of the collet flex instead of breaking.
- Beefy ½-13 UNC threads allow for a tight hold on the file
- Clamping at the front of the front of the tang to minimize flexing and vibration during use
The nut prints just fine vertically. I use a little bit of hand soap to lubricate the threads.
Recommend settings for printing the handle horizontally:
- Auto-generated supports: Yes
- Support only on build plate: Yes
Update (3/11/2024):
- Address a weak point in the nut
- Smaller, rounder handle
- Add tabs to make printing easier