1 / 2
Another Needle File Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wasn't happy with any of the needle file handles I could find so I made one.
- Rating
- 4.5 / 5
- Likes
- 313
- Downloads
- 789
- Makes
- 8
- Views
- 2,991
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Couldn't find a needle file handle I was happy with, so I made another. The needle files from my local hardware store are 3mm (1/8") in diameter and so the handle is sized accordingly. If your files are a different size, let me know the diameter and I can export another stl file.
Features:
- Handle is designed to print horizontally, so the fingers of the collet flex instead of breaking.
- Beefy ½-13 UNC threads allow for a tight hold on the file
- Clamping at the front of the front of the tang to minimize flexing and vibration during use
The nut prints just fine vertically. I use a little bit of hand soap to lubricate the threads.
Recommend settings for printing the handle horizontally:
- Auto-generated supports: Yes
- Support only on build plate: Yes
Update (3/11/2024):
- Address a weak point in the nut
- Smaller, rounder handle
- Add tabs to make printing easier