1 / 1
x end idler tensioner for Prusa MK3/s X-Axis R4+ -- additional spacings and longer screw sockets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly upgraded X idler tensioner MK3/s X-Axis R4+. Added spacings between idler and idler socket and deeper bores.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- Added spacing inside idler socket between idler and walls. It's 1,4mm in total. It fits perfect with W6mm, 20T, bore 3mm, toothless idler (which should be 8mm wide). It sets idler and belt aligned in axis to motor and X carriage.

- Bores on the back for adjustment of tensions are 1,2mm deeper, so it give's a bit more freedom in adjustment.

Can be printed without supports. Best with ABS, ASA, PCTG, PC, PA.
Model is reworked STL file… so the screen shots are quite messy, sorry for that :)