1 / 1
x end idler tensioner for Prusa MK3/s X-Axis R4+ -- additional spacings and longer screw sockets — image 1

x end idler tensioner for Prusa MK3/s X-Axis R4+ -- additional spacings and longer screw sockets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slightly upgraded X idler tensioner MK3/s X-Axis R4+. Added spacings between idler and idler socket and deeper bores.

Rating
0 / 5
Likes
7
Downloads
58
Makes
0
Views
570
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike
  1. Added spacing inside idler socket between idler and walls. It's 1,4mm in total. It fits perfect with W6mm, 20T, bore 3mm, toothless idler (which should be 8mm wide). It sets idler and belt aligned in axis to motor and X carriage. 
  2. Bores on the back for adjustment of tensions are 1,2mm deeper, so it give's a bit more freedom in adjustment.

 

Can be printed without supports. Best with ABS, ASA, PCTG, PC, PA.

Model is reworked STL file… so the screen shots are quite messy, sorry for that :)

Tags