frameless Picture frame hanger for a wardrobe backside
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
you will need a M3 screw and nut to hang this bad boy
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
If you want to spice up your wardrobe backside because you have oriented the wardrobe in your room that shows its ugly back, this print is for you!
You will need:
- a 3D printer that can print this lovely adapter
- a frameless picture frame with those little rounded heads that you see in picture 3. Mine have the dimension 6 mm diameter of the head and 4 mm diameter of the thinner hanging cylinder
- a wardrobe top with 15 mm thickness
- two M3x20 screws (3mm screws that are 20 mm long) and two M3 nuts
- a beautiful picture to put in there
I designed the part to insert the nuts and use the screws to clamp down on the wardrobe top. I used the Prusa fuzzy skin feature to generate a little more grip. The screw slots have teardrop shapes to make the printing process easier and no need to use supports there. The slot for the picture frame needs a little support though, I added organic supports.
If you need different dimensions for the clip on, just post a comment and I can upload a different version. Also comment if you want some advice on what to hang!
I was searching amazon for a picture frame like mine with those rounded heads but couldnt find it! If anyone finds one please send me link <3