Tube Light Holder for IKEA Skadis wall panels (Nanlite Pavotube, Aputure Amaran)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These 100mm or 200mm protruding arms will hold your tube lights nicely on an IKEA Skadis wall panel.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These 100mm or 200mm protruding arms will hold your tube lights nicely on an IKEA Skadis wall panel.
Print them in PLA with 3 perimeters, 3 bottom and 3 top layers, 15% gyroid infill
There is a 100 mm and a 200mm version available.
The diameter for the tube light is 38mm, which fits perfectly the Nanlite Pavotubes but also the Amaran PT4C and T4C tube lights.
If you need 3D printable IKEA Skadis panels, check out my version here: https://www.printables.com/model/798248-ikea-skadis-wall-panel-6x6-holes-240x240mm-with-st