1 / 4
Faceplate for 128x32 OLED
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OLED faceplate that you can mount how you like. Glue or screw.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a finished piece of plywood that i made to large of a hole for a 16x2 OLED I had on hand but did not work with my Adriuno programming. I had to switch to a 132x28 OLED .91 and I did not want to have to redo the plywood.
So I designed this faceplate in Fusion to fit my exact needs. The overall size of the faceplate is 80mm x 40mm with extruded steps on either side of the OLED for easy fit. OLED can be hot glued at the edge to the rear of the faceplate.
Printed with PLA used 15% gyroid for strength.