1 / 4
Faceplate for 128x32 OLED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OLED faceplate that you can mount how you like. Glue or screw.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 79
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I had a finished piece of plywood that i made to large of a hole for a 16x2 OLED I had on hand but did not work with my Adriuno programming. I had to switch to a 132x28 OLED .91 and I did not want to have to redo the plywood.
So I designed this faceplate in Fusion to fit my exact needs. The overall size of the faceplate is 80mm x 40mm with extruded steps on either side of the OLED for easy fit. OLED can be hot glued at the edge to the rear of the faceplate.
Printed with PLA used 15% gyroid for strength.