1 / 4
Modular Screw Box (From Levytek's model)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
(This is a remake. The base and top are provided. Refer to the original for other parts.)
I like Levytek's model. The only issue I have is when I pull the drawer. I simultaneously pull it upwards and forward. That sometimes causes the separation of the bases from the pins. I can use glue, but I am not a fan of it. So I have modified the system to allow for the insertion of joiners from the side.
I printed some parts using these parameters:
15% infill cubic or grid
4 or 5 Top shell Layer
Zero Bottom shell layer. It will result in significant savings in terms of plastic usage and time.