Modular Screw Box (From Levytek's model)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remake. The base and top are provided. Refer to the original for other parts.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 105
- Makes
- 0
- Views
- 1,015
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
(This is a remake. The base and top are provided. Refer to the original for other parts.)
I like Levytek's model. The only issue I have is when I pull the drawer. I simultaneously pull it upwards and forward. That sometimes causes the separation of the bases from the pins. I can use glue, but I am not a fan of it. So I have modified the system to allow for the insertion of joiners from the side.
I printed some parts using these parameters:
15% infill cubic or grid
4 or 5 Top shell Layer
Zero Bottom shell layer. It will result in significant savings in terms of plastic usage and time.