Biltema Pegboard Hammer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little…
- Ocena
- 4,9 / 5
- Polubienia
- 154
- Pobrania
- 1112
- Wydruki
- 17
- Wyświetlenia
- 4082
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022
I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is enough and this comes plenty strong even if printed back towards the buildplate. It would be even stronger if printed 90 degrees in different orientation so that layers lines would go against the strain, but seems like 4 walls makes it strong enough even this way.
This takes 13 grams of filament if printed with skirt and it takes 1h 18min printing time with 60mm/s speed and 0.2mm layer hight.
Update 28.4.2022
There was some weird problem in the STL file, which is now fixed. I will still leave the original file online, just prefer the fixed file!
Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters. You can also attach this to any wood surface with wood screws.
I collected bunch of Biltema pegboard stuff to one collection:
https://www.printables.com/social/78252-ippe/collections/271853
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
Fillamentum PLA Extrafill Sky blue
Category: Tool Holders & Boxes