1 / 2
CG GMC-500+ Radiation Monitor Stand — zdjęcie 1
1 / 2

CG GMC-500+ Radiation Monitor Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tired of your GQ radiation monitor tipping over? I sure was, especially with the less than ideal location of the USB…

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Tired of your GQ radiation monitor tipping over? I sure was, especially with the less than ideal location of the USB cable, which makes it top heavy. This form-fitting stand adds a 10mm base around the bottom, making it much less tippy. When printed in Prusament Signal White PETG, you almost can't tell that it didn't come with the detector.

Both the STL and the Fusion 360 file are provided. The design is fully parameterized, so the thickness of the base, the width of the base, the height of the shroud, etc, can all be changed by adjusting the various parameters.

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu X1C

Rafts:

No

Supports:

No

Resolution:

0.20mm

Infill:

15%

Filament: Prusament PETG Signal White

Category: Other

Tagi