CG GMC-500+ Radiation Monitor Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of your GQ radiation monitor tipping over? I sure was, especially with the less than ideal location of the USB…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Tired of your GQ radiation monitor tipping over? I sure was, especially with the less than ideal location of the USB cable, which makes it top heavy. This form-fitting stand adds a 10mm base around the bottom, making it much less tippy. When printed in Prusament Signal White PETG, you almost can't tell that it didn't come with the detector.
Both the STL and the Fusion 360 file are provided. The design is fully parameterized, so the thickness of the base, the width of the base, the height of the shroud, etc, can all be changed by adjusting the various parameters.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
15%
Filament: Prusament PETG Signal White
Category: Other