Biltema Pegboard Solder Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All my solder rolls are 30mm wide and have 20mm hole, so this holder has room for 32mm wide roll and stub diameter is…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 119
- Wydruki
- 3
- Wyświetlenia
- 741
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All my solder rolls are 30mm wide and have 20mm hole, so this holder has room for 32mm wide roll and stub diameter is 19mm.
This uses 6 grams (1.9m) of filament and is ready in 51 minutes when printed with skirt and speed of 60mm/s.
You can also print this on it's actual stance, but then use little bit of support at the end of stub. But it should not make any difference in durability.
Screw holes fit Biltema perboard, which holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters. You can also attach this to wall with wood screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2
Infill:
10
Filament:
3DJake eco PLA Orange
Notes:
Set 4 or more walls to get tough print, this is functional print and not something you look at behind glass showcase.
Category: Tool Holders & Boxes