Mele Quieter3 Stand - Mountable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raised stand for Mele Quieter 3 PC with mounting holes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple raised stand for the Mele Quieter3 PC. Providing for a gap between the PC and the stand should allow passive airflow to help keep the PC a bit cooler. To attach the PC to the stand, you'll need 2x m3x20mm socket head cap screws. To attach the stand to your mounting surface, you'll need 4 screws of your choice - I'm using #6 x ½" pan head wood screws to attach the stand to the base of my DIY astrophotography imaging rig (an Open Astro Tracker). This stand would also be useful to attach the PC to the underside of a desk, etc.
This should be relatively straightforward to assemble - put the PC in the stand and attach the stand to the pc using the mounting holes in the pc using the two m3x20 SHCS. Once the PC is attached to the stand, attach the stand to your chosen mounting surface. Plug everything in, and away you go.
I printed the stand in ABS, but it should work with pretty much any plastic you want to use.