Jig for cutting 1.75mm PTFE Tubing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a jig for cutting Bowden Tubing down to 120mm lengths using the Capricorn tubing cutter. We stock Capricorn…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a jig for cutting Bowden Tubing down to 120mm lengths using the Capricorn tubing cutter. We stock Capricorn tubing at PrintedSolid.com for E3D and other hotends. Manually measuring the lengths got to be a bit annoying, so we made this jig. As an added bonus, if your printer is calibrated right, it acts as a no-go gauge for tubing that is out of spec on the high side.
As long as you're able to do even moderate bridging, you can print this with no infill.
If you want to modify it for a different length, you are welcome to access the original on onshape
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
No
Supports:
No
.25mm
Infill:
no
Notes:
Print with about 3 shells.
Category: Hand Tools