Kobra Neo Cartographer3d/beacon3d adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this mount uses the kobra neo stock probe holder allowing vertical adjustment and minimal changes to the printer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
this mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits kobra neo and similar printers.
In printer.cfg these are the printer specific settings that need changed in addition to anything required with cartographer/beacon
for kobra neo offsets stay the same at
x_offset: 37.5 y_offset: 4
and under bed mesh these are the minimums. you may be able to expand everything except 32 under mesh min as that's the left limit switch point.
mesh_min: 32, 10 mesh_max: 205, 205
At some point I may adjust the mount to sit further back and left bringing it closer to being directly behind the extruder however as it currently stands, to do that makes it clash with the right x axis mount and I would have to adjust how the 2 boards on the cartographer sit and at this time that's more than I'm willing to do given my limited time. if one wanted to you could make this work by either making the boards 90 deg to each other instead of flat(maybe will fit) or add wires in between the boards which would definitely work allowing you to move the second board elsewhere.
items needed
2x M3 heat insert m3x3x4.5 https://www.aliexpress.us/item/3256804349544912.html
2x flat M3x6mm screw like this https://www.aliexpress.us/item/3256804883804669.html