Geometric panel Stamps For making balls and footbags
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various printable stamps for accurately cutting out and sewing ball panels.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Using just a 3d printer and basic sewing skill you can make accurate ball panels. Its as easy as stamping with a standard stamp pad, white if the fabric is dark, then just sw on the dotted line. use saddle stich for best results.
Print the stamps pointed up. Use 10mm magnets inside with ca glue. if some magnets are opposite each other stamp to stamp, just be sure the install the handle magnets with both directions.
I've improved the original way I did this by adding a handle with magnets. now the stamps can be used on an arbor press or by hand.
So far I've made denim hacky-sacks, a leather toy ball, and a ball made of denim and an old canvas tarp.
The stich spacing is 4mm to match the stitching forks I have, all except one: In order to get just the right size footbag I made one with different spacing (22mm pentagon)
The files are in .3MF, this is a far superior standard to .STL. With much smaller files sizes and higher detail, .3MFs are compatible with all major slicers and more software packages then .STLs.