Gamers Outreach Cart Xbox Series X Sync Button Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a add on for Gamers Outreach (GO) Carts that allows you to hit the sync button without unlocking the case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a add on for Gamers Outreach (GO) Carts that allows you to hit the sync button without unlocking the case. it consists of a flexible button plate that pushes a captive rod into the button. i used a bamboo chop stick as the push rod but anything 4-6mm in diameter.
the button plate needs to be printed on a multicolor printer like the bambu labs carbon x1. it includes a technically optional clear first layer that guarantees good adhesion for the detailed letters and assures a smooth, wipeable outer surface
- mount console where it will be
- line up and hot glue the guide in front of the sync button
- line up and glue the button into the front slot so that the hole lines up with the guide
- fit and cut the rod to fit. i normally start a little long from measurement and trim down slowly for a good fit. you may also need to taper the button-end so it loose fits in the hole
- place the rod and the clips. optionally glue the clips but make sure the rod doesn't get glued