Gamers Outreach Cart Xbox Series X Sync Button Pusher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a add on for Gamers Outreach (GO) Carts that allows you to hit the sync button without unlocking the case
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Share Alike
This is a add on for Gamers Outreach (GO) Carts that allows you to hit the sync button without unlocking the case. it consists of a flexible button plate that pushes a captive rod into the button. i used a bamboo chop stick as the push rod but anything 4-6mm in diameter.
the button plate needs to be printed on a multicolor printer like the bambu labs carbon x1. it includes a technically optional clear first layer that guarantees good adhesion for the detailed letters and assures a smooth, wipeable outer surface
- mount console where it will be
- line up and hot glue the guide in front of the sync button
- line up and glue the button into the front slot so that the hole lines up with the guide
- fit and cut the rod to fit. i normally start a little long from measurement and trim down slowly for a good fit. you may also need to taper the button-end so it loose fits in the hole
- place the rod and the clips. optionally glue the clips but make sure the rod doesn't get glued