Small Simple Graduation Cap (no support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a simple graduation cap I designed as a gift for some friends. The model is quite fast and easy to print.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 301
- Wydruki
- 1
- Wyświetlenia
- 1108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a simple graduation cap I designed as a gift for some friends of mine.
The model is quite fast and easy to print, with no support needed if nicely oriented. It was designed to have this features, that I hardly found in other design online. Mainly mine was a time issue, I was in a hurry to leave so this pushed me to design this version.
I've printed it on my Flsun SR with black sunlu PLA+. I've printed it in 50% scale due to time issues, so keep it in mind while looking at the pictures.
My advice for the easiest print is to lay the flat top of the hat onto the print bed. Infill can be minimal.
I used the following main setting:
- 2 wall line
- 5 bottom layer
- 4 top layer
- ironing (just in case)
Hope you like it