Tel'tak Retractable MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PrusaSlicer 2.4.0-alpha's new painting feature for printing in different colors in case you have an MMU or equivalent
- Ocena
- 0 / 5
- Polubienia
- 76
- Pobrania
- 323
- Wydruki
- 0
- Wyświetlenia
- 1691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
- Gray bits
- Gold bits
- A few Black/Dark Gray bits
A bit different from my usual approach. This time using [alpha version of] PrusaSlicer 2.4.0's new color painter feature rather than split up .stls through Fusion360.
Simply load up each .3mf file as a project into [at least] PrusaSlicer 2.4.0-alpha1 (i did these using alpha3) and the painted segments should be on the applicable part. Feel free to move each part around and/or modify any print settings as you'd like - these settings are simply what I used and come as part of the file. The only ‘modification’ I made was adding the ‘brim’ around the pointy part in part 1 to prevent potential sharp-corner-curling.
I hope your printer is well tuned; many of the moving parts require precise spacing to work well. Otherwise, I hope you are good with sanding ;)
Also you may want to size down the smaller pins to 97-98% to make it easier on your thumbs.
Try to ignore the printing errors in my images; I'm having issues with my printer/filament ¯\_(ツ)_/¯
Original model by Martin Taichl.