Tel'tak Retractable MMU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PrusaSlicer 2.4.0-alpha's new painting feature for printing in different colors in case you have an MMU or equivalent
- Rating
- 0 / 5
- Likes
- 76
- Downloads
- 323
- Makes
- 0
- Views
- 1,691
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
- Gray bits
- Gold bits
- A few Black/Dark Gray bits
A bit different from my usual approach. This time using [alpha version of] PrusaSlicer 2.4.0's new color painter feature rather than split up .stls through Fusion360.
Simply load up each .3mf file as a project into [at least] PrusaSlicer 2.4.0-alpha1 (i did these using alpha3) and the painted segments should be on the applicable part. Feel free to move each part around and/or modify any print settings as you'd like - these settings are simply what I used and come as part of the file. The only ‘modification’ I made was adding the ‘brim’ around the pointy part in part 1 to prevent potential sharp-corner-curling.
I hope your printer is well tuned; many of the moving parts require precise spacing to work well. Otherwise, I hope you are good with sanding ;)
Also you may want to size down the smaller pins to 97-98% to make it easier on your thumbs.
Try to ignore the printing errors in my images; I'm having issues with my printer/filament ¯\_(ツ)_/¯
Original model by Martin Taichl.