Watch Holder Display Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My current best build of a convenient, expandible, classic watch organizing system. Optionally weighted and padded.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 324
- Wydruki
- 1
- Wyświetlenia
- 2059
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my latest attempt at a beautiful, flexible, classic watch holder, organizer and display.
Mine (pictured) is actually created using both my printer and laser to cut synthetic leather, as well as acrylic, but the printable models I've included do not require that.
For one watch holder you will need:
1 watch holder base & 1 watch holder insert.
I recommend printing the insert out of a contrasting color to the holder to give it a nice look. Alternatively, if you have a laser cutter or drag-knife, you can take the dxf file labeled “insert” and cut your own fabric. The recess in the watch holder base is designed to accommodate an insert about 1.35mm high, which was how tall my fake leather was.
You can print a tray to organize up to 6 of them.
Optionally: These are designed with a void in the middle to add weights. I really like these weights. You can pause the print to insert them, or just print with no pause and it will complete just fine.