1 / 3
Safe Crown and Restoration Rinser for HVE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't use the sink or the HVE and loose your crown. Safe way to rinse without the worry.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Made this to help with the issues of properly rinsing crowns while not worrying about loosing it or making a mess.
Simple to use. Put it on your HVE and turn it on. Place the crown inside the holder and rinse. Easy to use.
**If you want to aggressively dry the crown too, I would just recommend cupping your hand over the holder to increase the suction.
MUST DO TO PRINT
- upload to the slicer
- 2 perimeters
- 0 top and 0 bottom layers
- 15-20 infill
- I like the Gyroid infill. Play around with different ones, but make sure the one you pick doesn't have areas the water would pool inside the infill.
- Print standing up
- If your printer has issues with adhesion, you may need an outside brim
- If they are too tight or too loose adjust your scale
- Print a ton for 1x use only, unless you didn't contaminate, you could use these more often