1 / 3
Safe Crown and Restoration Rinser for HVE — image 1
1 / 3

Safe Crown and Restoration Rinser for HVE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Don't use the sink or the HVE and loose your crown. Safe way to rinse without the worry.

Rating
0 / 5
Likes
16
Downloads
83
Makes
0
Views
461
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Made this to help with the issues of properly rinsing crowns while not worrying about loosing it or making a mess.

Simple to use. Put it on your HVE and turn it on. Place the crown inside the holder and rinse. Easy to use. 

**If you want to aggressively dry the crown too, I would just recommend cupping your hand over the holder to increase the suction.

MUST DO TO PRINT

  1. upload to the slicer
  2. 2 perimeters
  3. 0 top and 0 bottom layers
  4. 15-20 infill
  5. I like the Gyroid infill. Play around with different ones, but make sure the one you pick doesn't have areas the water would pool inside the infill.
  6. Print standing up
  7. If your printer has issues with adhesion, you may need an outside brim
  8. If they are too tight or too loose adjust your scale
  9. Print a ton for 1x use only, unless you didn't contaminate, you could use these more often

Tags