1 / 10
Xerses - Q-Tip/Cotton Swab Dispenser — zdjęcie 1
1 / 10

Xerses - Q-Tip/Cotton Swab Dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds a box of cotton swab sticks (Q-Tips)

Ocena
0 / 5
Polubienia
15
Pobrania
146
Wydruki
1
Wyświetlenia
521
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

2024-07-21 UPDATE: As per a request from someone on MakerWorld, I created a cover for my dispenser. I have added the STL as well as a second print plate in the 3MF.

2024-04-01 UPDATE: I just bought the Q-Tip brand of swabs and they are slightly longer than the generic brand. I have updated the model file to be 2mm wider to accomodate the length of the Q-Tip branded swabs.

------------------------------------------------------------------------------

I had found a dispenser that was almost what I wanted, but the STL had alignment issues and I had some improvements I wanted to try, so I made this from scratch. The inner width is slightly wider than a generic Q-Tip, the front part has angled raised sides to prevent them from spilling out, the front face has angles and a rounded cutout to make it easier to take one. You should be able to fit an entire package in it.

I printed this in white Sunlu PLA+ using Bambu slicer 0.2 Standard settings with no supports and 15% infill.

Tagi