Replicator HBP Support Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
People have seen the front of their HBP sag almost 2mm after 30 minutes. Before this modification I was getting 1.8mm…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
People have seen the front of their HBP sag almost 2mm after 30 minutes. Before this modification I was getting 1.8mm sag after 30 minutes and now .45mm sag after 30 minutes.
If you don't have access to a laser cutter let me know and we can work something out.
Instructions
It's a simple fix. It's just some additional support without adding a lot of weight.
You will need 6 M3 16mm bolts & nuts. Disassemble and replace the main plate. I've included the two back plates and the front plate because I found the orginial files were not the same as the shipping model of the Replicator so I updated them to match and I modified the back to be more Replicator2 styled. Just cut it all out on a laser cutter with 5mm plywood.
I also added a center hole up front so if you want to modify your HBP to 3 point its ready to go.
If you want one of these in a kit form let me know I can do it for $25 which includes shipping if you're in the USA.
Category: 3D Printer Accessories