Replicator HBP Support Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
People have seen the front of their HBP sag almost 2mm after 30 minutes. Before this modification I was getting 1.8mm…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
People have seen the front of their HBP sag almost 2mm after 30 minutes. Before this modification I was getting 1.8mm sag after 30 minutes and now .45mm sag after 30 minutes.
If you don't have access to a laser cutter let me know and we can work something out.
Instructions
It's a simple fix. It's just some additional support without adding a lot of weight.
You will need 6 M3 16mm bolts & nuts. Disassemble and replace the main plate. I've included the two back plates and the front plate because I found the orginial files were not the same as the shipping model of the Replicator so I updated them to match and I modified the back to be more Replicator2 styled. Just cut it all out on a laser cutter with 5mm plywood.
I also added a center hole up front so if you want to modify your HBP to 3 point its ready to go.
If you want one of these in a kit form let me know I can do it for $25 which includes shipping if you're in the USA.
Category: 3D Printer Accessories